Adjusting The Feet; Electrical Connection; Wireless Network Settings - Grundig GTN 482610 GCH Bedienungsanleitung

A
Hose connection should
be made in a safe manner.
Your drain house will be
flooded if the hose comes
out of its housing during
water discharge.
C
Water drain hose should
be attached to a height of
maximum 80 cm.
C
Make sure that the water
drain hose is not stepped on
and it is not folded between
the drain and the machine.

4.5 Adjusting the feet

In order to ensure that the dryer
operates more silently and vibration-
free, it must stand level and balanced
on its feet. Balance the machine by
adjusting the feet.
Turn the feet to left or right until the
dryer stands level and firmly.
C
Never unscrew the
adjustable feet from their
housings.

4.6 Electrical connection

For specific instructions for
electrical connection required during
installation (see 2.1.1 Electrical
Safety)

4.7 Wireless Network Settings

Your appliance and the application
should be connected for application
to be usable.
To establish this link , follow the
instructions below.
First installation:
1. Press and hold Anti Creasing/
Settings buttons of your machine
for 3 seconds to enter settings
menu to adjust wireless network
settings.
2. Find the WLAN Setup by using
right-left buttons of HomeWhiz
button when you enter the settings
menu.
3. Activate WLAN Setup by pressing
the button in the middle. In the
display of your machine "WLAN
Setup: On" phrase will occur and
a password of eight digits will be
given.
Installation
WLAN Setup: Off
88888888
DE
EN
59