Werbung
Verfügbare Sprachen
Verfügbare Sprachen
– To remove any traces of milk from the steam nozzle, place a container under the
nozzle and launch a hot water drink. Then, take a clean, damp microfibre cloth and
wipe the nozzle.
– If steam does not come out, the nozzle may be clogged: unclog with the needle
supplied. See section 6- CLEAN YOUR STEAM NOZZLE, Fig 4 and 5.
HOT WATER DRINKS
– Place the cup under the STEAM NOZZLE (G).
– Press
– You can adjust the volume of the drink according to your preference. However, it is not
possible to make 2 cups at the same time: the "x2" function is not available.
– Press
. The machine preheats (the lights flash), then the hot water starts to flow.
– The Favourites function is available. See section 3- SAVE YOUR FAVOURITE
SETTINGS / REPROGRAM A FAVOURITE, fig 1 to 6.
GENERAL MAINTENANCE
Carrying out proper maintenance will prolong the life of your machine and preserve the
authentic taste of your coffee.
Important:
To make things simpler and more efficient, your Krups machine has an automated cleaning
system: a tablet is all that's needed! The appliance requires no manual maintenance. We
guarantee thorough cleaning at high temperatures for a perfect coffee every time.
MAINTENANCE OF THE COFFEE GROUNDS COLLECTOR
AND DRIP TRAY
The drip tray receives the waste water.
The coffee grounds collector receives the grounds extracted.
When do I empty the drip tray? See section 10 – EMPTYING THE DRIP TRAY, fig 1 to 5.
When the floats are in the upper position, indicating that it is too full.
For hygienic reasons, as this container is in contact with milk and coffee, we recommend
that you fully dismantle and clean daily each element under hot water.
It is recommended that you let it air dry before you put it back in the appliance. You can put
the drip tray in the dishwasher.
When do I empty the coffee grounds collector? see 9 – WARNING LIGHTS (W): EMPTY
THE COFFEE GROUND COLLECTOR, fig 1 to 5.
When the "alert" LED
on the interface and the warning light (W) are lit up.
You can periodically empty it before the machine asks you to but when the machine is
turned on so that it can register that the bin has been emptied.
For hygienic reasons, we recommend that you clean the coffee ground container daily
under hot water with soap and sponge. It is recommended that you let it air dry before you
put it back in the appliance.
44
Important:
The coffee grounds collector has enough capacity for about 9 coffee portions; not
regularly emptying the coffee grounds container and drip tray as indicated above
can damage your machine.
MAINTENANCE OF WATER TANK AND COFFEE BEAN
CONTAINER
For the preservation of best coffee flavor impacted by the quality of the water and hygienic
reasons, we advise you to use only fresh water and to daily clean the water tank with hot
water and a bottle brush.
Coffee beans can leave greasy residue on the tank that can affect the quality of the coffee.
For the preservation of best coffee flavor and hygienic reasons we recommend you to wipe
it with a dry, soft cloth each time it needs to be refilled.
Important:
Do not clean with water, the presence of water in the bean hopper could damage
the machine
It is recommended that you let it air dry before you put it back in the appliance
Rinsing the coffee system
This function is available at any time, unless the machine requires other maintenance.
– Place a container under the coffee nozzles.
– Switch on your machine then press
– Select the rinse function
.
Press
to start rinsing.
For hygienic reasons, it is recommended to rinse the coffee system daily or when not used
for a longer period (more than 2 days).
This function can be automatically done on start up. For more information, please refer to
"OTHER FUNCTIONS"
Full automatic cleaning program for the machine, 3 times a
year (approximately 13 minutes)
For the preservation of best coffee flavor and hygienic reasons we recommend you to clean
the coffee system 3 times a year.
For this cleaning you will need:
– 1 KRUPS cleaning tablet
– 1 container of at least 600 ml
The cycle will link two phases:
– 1 cleaning phase
– 1 rinsing phase
When do I run this program?
When it is necessary to run a cleaning program, the appliance notifies you.
When the machine is switched on, the "alert" LED
light up. See 11 – AUTOMATIC COFFEE SYSTEM CLEANING PROGRAM, fig 1 to 27.
.
and the LED
on the interface will
45
Werbung
