Milnor M7V4836 Bedienungsanleitung Seite 13

3_bbUSdY^W5bb_bc±
3U^dbYVeWQ\5hdbQSd_b
RECOVERY: Request management assistance to reconfigure the machine, reinstall the standard
formulas, and reprogram the wash formulas.Return to run mode to resume operation.
RECOVERY: Press
the equipment. If the message returns, request authorized service.
usually require accessing mechanical or electrical components. Request authorized service in
accordance with published safety information. See the safety manual.
RECOVERY: Request authorized service.
RECOVERY: If the cylinder is stationary, request authorized service. The message clears when
the circuit closes.
RECOVERY: Request authorized service. The message clears when the switch detects adequate
pressure.
RECOVERY: Request authorized service. The message clears when the door is down.
RECOVERY: Request authorized service. The message clears when door is up.
Configure data or program data was corrupted.
A circuit board is failed or is missing.
. Request management assistance to verify that configure values match
A keypad key was stuck or shorted.
The speed switch circuit is open.
The brake pressure switch detected insufficient air pressure in the brake
release air cylinder to guarantee brake has released.
The moving panel permitting clearance for the extractor drain did not move
down within five seconds after the extractor tilted up to discharge.
The moving panel permitting clearance for the extractor drain did not move
up within ten seconds after the extractor desired to tilt down.
=C?E53DC15 )$#&1F" #
9
—These errors