Ruris RTX600 Bedienungsanleitung Seite 29

EN
Move the disc guard (E) up and down 3-5 times, then tighten the nuts (A)
Replacing the transmission belt
1. Loosen the three nuts (A) securing the upper belt guard. Turn the
belt tensioner (B) to the "O" position to loosen the belt.
2. Remove the top guard then remove the back guard.
3. Replace the drive belt. Turn the pretensioner (B) to position
"1" to tension the drive belt.
4. Install the belt guards and tighten the nuts (A). Move the
blade guard (E) up and down 3-5 times, then tighten the nuts
(A).
Power system
Check the fuel cap and its seal.
Check the fuel hose. Replace it when damaged.
The fuel filter is located inside the fuel tank. The filter cannot be cleaned, it must be replaced with a new
filter when it is clogged. The filter must be changed once a year.
Air filter
13