Ruris RTX600 Bedienungsanleitung Seite 19

EN
Do not use circular saw
Do not use cracked or
blades, carbide blades, or
damaged discs.
wood cutting blades.
2.2. WARNINGS
1. Practice:
• Carefully read the instructions for use and maintenance, familiarize yourself with all the operating
mechanisms and the correct use of the machine. Failure to follow all instructions may result in serious
injury or property damage.
• Never allow children or people unfamiliar with these instructions to use the machine
.
• Never work when people, especially children or pets are nearby
.
• Do not modify this product in any way. Unauthorized modification may affect product operation and/or
operator safety. There are specific applications for which the product was designed .
2. Preparation:
• Inspect the work area before each use. Keep the work area clean, dry, clutter-free and well-lit. Crowded,
wet or dark work areas increase the risk of injury.
• Do not use the cutter where there is a risk of fire or explosion; for example, in the presence of flammable
liquids or gases, the cutter may create sparks and ignite.
• The cutter must not come into contact with an electrical source. It is not insulated and contact will cause
electric shock.
• Keep children and bystanders away from the work area while using the cutter.
• Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards that may exist
in the work area. Some of these hazards may be hidden and may cause personal injury and/or property
damage if the cutter comes into contact with them.
3.Operation:
• Do not use the trimmer while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while using the cutter can result in serious personal injury.
• Wear protective equipment. Do not wear loose clothing, objects or jewelry that can get caught in the
moving parts of the trimmer. Keep hair, clothing and gloves away from moving parts. Vents on the cutter
usually cover moving parts and should be avoided.
• Wear appropriate personal protective equipment when required. Use ANSI Z87.1 safety glasses with side
shields or, when necessary, a face shield. Use a mask in dusty working conditions. Also use non-slip safety
shoes, hard hat, gloves, dust collection systems and ear protection when appropriate. This applies to all
people in the work area.
• WARNING - Gasoline is highly flammable:
- store fuel in specially designed containers.
- refuel outdoors only and do not smoke while refueling.
- add fuel before starting the engine. Never remove the tank cap or add gasoline while the engine is
running or when the engine is hot.
- if gasoline has been spilled on the machine, do not try to start the engine, move the machine away from
the spill area and avoid creating any source of ignition until the gasoline vapors have evaporated.
- make sure the tank cap seals tightly when tightened. If it is damaged, replace it.
• Do not force the cutter, it is safe and effective when used as intended.
• Do not pull the cutter to one side, as the disc may jam or break and cause injury.
• Check for damaged parts before each use. Replace damaged or worn parts immediately . Do not use the
cutter if it has worn or damaged parts.
3