Technical Data; Overview Of The Machine - Ruris Rtx600 Bedienungsanleitung

EN
• Store the product when not in use. Store it in a dry and safe place. Make sure the cutter is in good working
order before storage and before reuse.
• Use only accessories recommended by the manufacturer. Never use an accessory with lower technical
specifications than the cutter.
• Do not use the cutter if the guards and safety devices are defective or not fitted.
• If you hit a foreign object, stop the engine and carefully check the machine for damage. If it is damaged,
restart it and use it only after it has been repaired.
• In case of abnormal vibration, stop the engine immediately to find the cause.
• Stop the engine when leaving the machine, before refueling and during maintenance, adjustment or
inspection of the machine.
• Before cleaning, repairing or inspecting the cutter, the engine must be stopped and you must ensure that
all moving parts have stopped.
• Do not start the engine in enclosed spaces where dangerous carbon monoxide fumes can accumulate.
• Store in a place out of the reach of children and pets.
Motor
Duty cycle
Cilindrical capacity
Engine power
Engine RPM
Combustible
Tank capacity
Fuel mixture
Maximum cutting depth
Cutting disc diameter
Cutting disc speed
Net weight with accessories
Handle vibrations

4. OVERVIEW OF THE MACHINE

1. Disc
2. Front handle
3 Getting started
4. Throttle lock
5. Throttle lever
6. Priming pump
7. Water hose
8. Fuel tank cap
9. Shock lever
4

3. TECHNICAL DATA

25 ml of oil/ liter of gasoline
General Engine
2 stroke
58 cc
3.3 hp
Maximum 8500 RPM
Fuel mixture
750 ml
100 mm
300 mm
4800 r/min
10.1 kg
2
9,822 m/s , K=1.5 m/s
2