Victron energy Peak Power Pack PPP-8 Anleitung Seite 8

Connection of the power adapter (mains)
The "mains" jack connects to the 15 V power adapter (included).
The power adapter has to be connected to a mains outlet socket.
(100...240 VAC, 50...60 Hz)
The car/solar input
A 11 to 25 VDC power source can be connected to the car/solar
input, to charge the PPP from the towing car electrical circuit, a
12V-solar panel or a 12V-battery. When connecting to a car trailer
plug, the used contact must be carefully selected, not to overload
any circuit or to over discharge the car battery.
As an example, the commonly used 13p "Jaeger" plug is
described. The pin numbering for the "Multicon WeST" plug is the
same.
6