Akrapovic Slip-On Installationsanweisungen Seite 8

www.akrapovic.com
5. Partially remove stock muffler, as shown and remove valve cables off the bracket and muffler. Carefully remove
stock muffler off the motorcycle (F 05).
CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
INSTALLATION OF THE AKRAPOVIČ EXHAUST SYSTEM:
1. Attach the additional Akrapovič stainless steel bracket to the right passenger's footrest, using Akrapovič M8x16
bolt (F 06).
IMPORTANT: use bolt sealant on the bolt threads!
22Nm
16ftlb
F 05
F 06
8 / 16