Akrapovic Slip-On Installationsanweisungen Seite 6

www.akrapovic.com
REMOVAL OF STOCK EXHAUST SYSTEM:
1. Put the motorcycle on a side stand, we recommend a central racing stand. Make sure, that surface is solid and flat.
2.
Unscrew marked bolts and carefully remove heat shield off the motorcycle (F 01).
CAUTION: be careful not to injure yourself or damage any part of the motorcycle during this procedure!
Unscrew marked bolt and loosen marked clamp (F 02, 03).
3.
IMPORTANT: be careful not to damage any part of the motorcycle during this procedure!
F 01
F 02
6 / 16