Moorebot Scout Benutzerhandbuch Seite 26

BIST (Built-In-Self-Test)
BIST is a built-in automated diagnosis program to cover hardware
testing. To perform BIST, the App must connect to the robot in either
Wi-Fi direct mode or in Wi-Fi router mode. Place the robot on its
charging station, start the BIST program in the App setup section. The
robot moves out and produces some high-pitched sound. In the end,
a report is generated on the App.
Add-on tools
Scout is also a robotic development platform. A UART port is available
on the top of the robot. Remove the metal panel, the UART port is
accessible. One can use 3D printing to design new tools for Scout.
From LED torch to toy gun, to a robotic arm. Only imagination is the
limit. Complex tools may require C/C++ programming. Scout's
robotic control layer is open source. For serious developers, please
contact us at contactus@moorebot.com for more information.
Contact us
If you need help, please don't hesitate to contact Moorebot Support
26