Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

(13.2) Do not make the min insert mark exposed.
Min Insert
14 . Suspension fork adjusting。
(14.1) To make the Suspension soft, turn the speed lock
handle anticlockwise until the end
(14.2) To make the suspension sti , turn the speed lock handle
clockwise until the end.

Cautions

Check before riding
(1) Make sure the front and rear brakes are sensitive, and the brake
pads are not seriously worn (more than 1/3).
(2) Make sure the tire pressure is su cient and the tire is not
seriously worn.
(3) Make sure the mechanical parts are not broken or loose
especially the handbar, front fork and wheels. make sure all bolts
and fasteners are fastened enough.
(4) Make sure the disc brake disc is not cracked or deformed, make
sure the chain does not touch the wheel.
(5) Make sure that the battery has enough power and the battery
has been firmly stuck in the battery compartment.
Tips during the riding
(1) Turn the throttle slowly when starting the bike. Starting too fast
will cause excessive current and a ect the service life of
components.
(2) Frequent braking and starting shall be minimized to save
electric power consumption and prolong the working life of
electrical components.
15
(3) In order to reduce the current of the electrical components, it is
better to use pedal assistance when riding on steep slopes.
(4) Stop the bike immediately for inspection when the bike makes
abnormal noise during the riding.
(5) To slow down or stop the bike we recommend you to operate the
rear brake first, and then operate the front brake.
(6) In rainy or snowy weather, kindly suggest to take the brake
slowly in advance rather than taking a sudden brake.
(7) It is recommended to ride in good weather and road conditions.
Do not riding in heavy rain, otherwise the water will get into the
display, battery and other electrical components and cause failure.
(8) Please follow the local tra c rules, take safety measures and
wear safety helmets when riding.
(9) Do not ride an bike when you are in poor health.
Precautions for long-term storage
(1) The bike frame needs to be wiped up for the long-term
storage. Lubricate the flywheel, chain and chain puller if these
parts are lack of lubricating oil. Repaint the bike frame to
prevent rusting if the frame is scratched.
(2) The bike shall be stored in a dry, cool and tidy place.
(3) Turn o the power button to cut o the battery power if there is
a power button on the battery.
Battery and charger operation
(1) Make sure the battery and charger are not damaged when
using.
(2) Make sure the battery and charger stay far away from the
environment of fire, immersion, overheating, high humidity,violent
vibration, collision etc.
(3) Make sure the outer substance especially the metal sta will
not penetrate into the charger.
(4) Make sure the charger is being used at rated voltage and
frequency.
(5) Disconnect the charger immediately from the power supply
socket when the charger is in the state of sparks, smoke and other
abnormal conditions.
(6) Make sure the battery is not being stored in the state of low
power.(Charge the battery for every 3 months ).
(7) Make sure the battery is not being excessively discharged and
charge the battery in time when it is running out of power.
(8) Make sure the battery is not being excessively charged and cut
16

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis