Assembly Instructions - JOBOBIKE COMMUTER Bedienungsanleitung

Assembly Instructions

Step 1
Unpack the bike
Open the package and take out all of the parts. Be careful of not
missing even a little piece of part. The parts shall include:
• Frame
• Front wheel
• Front wheel axle
• Pedals
• Charger
• Front light
• Keys
• Toolbag
• Manual
Step 2
Unfold the kickstand to make the
bike stand up
Step 3
Install the handlebar
3.1 Screw the bolt anticlockwise and remove the parts that we
don't need.
7
3.2 Install the handle stem on the front fork stem.
3.3 Expose the bolt mounting hole and then screw the bolt tightly
with a wrench clockwise.
(3.2) (3.3)
3.4 Adjust the angle of the handle stem, then lock the quick
release to fix the handle stem and the handlebar.
Step 4
Install the front wheel
4.1 Remove the two plastic covers that attached to the tire for hub
protection.
4.2 Remove the plastic sheet from the brake caliper.
8