Prepairing The Tools; Spare Parts - Precisa 321 Wartungsanleitung

321
2.1.3.2 Instruments
•
Soldering iron
•
Voltmeter
2.1.3.3 Standard tools:
•
Box spanner Nos.4, 5.5 and 7
•
Flat-bladed screwdriver Nos.1, 2 and 4
•
Phillips screwdriver No.2
•
Hexagon socket wrench SW 2.5mm
•
Hexagon key 1.5mm
•
Open-end wrench No.7
•
Tweezers
•
Magnifier
2.1.4

Prepairing the tools

•
Screw the 2 long [2] and 2 short [3] support posts on the assembly plate as shown in the figure
of the tool kit.
•
Preheat the soldering iron to 310 ± 5°C (590 ± 10°F).
2.1.5

Spare parts

•
Have all required spare parts at disposal, the fitting flexures (3), (6) and (8), according to the
instructions in chapter "1.5.2 Flexure repair sets – Lager-Reparatursets" on page 12.
Repairs
29