Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1
Disconnect the device from power and allow it to cool before cleaning.
2
Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3
The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a
disposal which is not harmful to the environment. Devices marked with this symbol must not be
disposed of as household waste. Contact your retailer or local authorities for more information.
Remove any inserted batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited. You may return
your used batteries free of charge to collection points in your municipality and anywhere where
batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly,
you contribute to the protection of the environment.
TECHNICAL SPECIFICATIONS
Model:
Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Minimum distance from flammable surfaces:
Minimum distance to lighted object:
LED type:
Number of LEDs:
Dimensions (LxWxH):
Weight:
All information is subject to change without prior notice. © 30.03.2021
LED Party UV Bar-9
100-240 V, 50/60 Hz~ 100-240 V, 50/60 Hz~
20 W
:
45° C
a
(steady state):
70° C
C
0.50 m
0.20 m
1 W UV SMD
9
50 x 6,5 x 6,5 cm
0.7 kg
10/12
No. 51930304
LED Party UV Bar-18
40 W
45° C
70° C
0.50 m
0.20 m
1 W UV SMD
18
100 x 6,5 x 6,5 cm
1.1 kg
No. 51930306
00133422, Version 1.1
Werbung
