Integra INS301 Bedienungsanleitung Seite 5

Product Disposal
Pole Mount Assembly should be
disposed of in accordance with
your facility protocol. Dispose of
used cell batteries in accordance
with your facility protocol.
Laser Level Disposal Procedure:
1. Remove brackect from rear of la-
ser using a screw driver.
2. Remove battery compartment
cover by sliding it from the plas-
tic case.
3. Remove the two type N zinc-car-
bon batteries.
4. Dispose of the two batteries via
an approved battery recycling
center.
5. The laser plastic laser housing
and bracket may be discarded
in normal waste as none of the
component are subject to spe-
cial measures as per Directive
2012/19/EU.
Product Order Information
All products can be ordered
through your Integra NeuroSpe-
cialist or customer service repre-
sentative.
Integra NeuroSciences
1100 Campus Road,
Princeton, NJ 08540 USA
Toll Free: 1-800-654-2873
Telephone: 1-609-275-0500
Fax: 1-609-275-5363
MADE IN USA
www.integralife.com
Integra LifeSciences Services
Immeuble Séquoïa 2
97 allée Alexandre Borodine
Parc Technologique de la Porte
des Alpes
69800 Saint Priest - France
Tel: 33 (0) 4 37 47 59 10
Caution: Federal (USA) law re-
stricts this device to sale by or on
the order of a physician or licensed
healthcare practitioner.
Catalog Numbers
External CSF Drainage Pole Mount
Assembly
INS301 Integra Pole mount Sliding
Bracket
INS400 Evolution™ Pole Mount
Assembly with cm H
mm Hg Rail with Laser Lev-
el and Line Level
INS400CM Evolution™ Pole Mount
Assembly with cm H
Rail Laser level and line
level
INS400L Evolution™ Pole Mount
Laser Level with bracket
INS410 Evolution™ Pole Mount
Assembly with cm H
and mm Hg Rail with Laser
Level and negative scale of
-25 cm H O / -18 mm Hg
2
and Line Level
INS410CM Evolution™ Pole Mount
Assembly with cm H
Rail and negative scale
of -25 cm H O
2
INS8903 Line Level Assembly (MR
Safe)
Symbols Used On Labeling
Consult instructions
for use
MR Unsafe
Lot number
Catalog number
Medical Device
Product Complies
with requirements
of Regulation (EU)
2017 / 745 for medical
devices
5
Symbols Used On Labeling
EC REP
O and
2
O
2
O
2
LASER RADIATION
INFORMATION
DO NOT STARE INTO BEAM
CLASS II LASER PRODUCT
O
Wavelength: 650 nm
2
Maximum Output: 1 mW
This device complies with 21 CFR
1040.10 and 1040.11 except for
deviations pursuant to Laser Notice
No. 50 dated July 26, 2001.
MANUFACTURED: YYYY-MM-DD
Manufactured for:
Integra NeuroSciences
1100 Campus Road,
Princeton, NJ 08540
USA
Technical Specifications:
Output Power: Less than 1 mW
Class II laser
Wavelength Range: 650 nm
Laser Composition: InGaAIP
Laser Lifetime: 10,000 Hrs
Voltage Output: 3 VDC
Current Drain: 35 mA
Housing Composition: ABS
Mounting System: Sliding Bracket
Batteries: Two "N" cells/1.5 V
(500 cycles)
Date of Manufacture
Manufacturer
Quantity
Authorized Represen-
tative in the Europe-
an Community.
Waste Electrical and
Electronic Equipment
Symbol
Caution
Caution: Federal
(USA) law restricts
this device to sale
by or on the order
of a physician or
licensed healthcare
practitioner.