Wohler VIS 2000 Handbuch Seite 30

5. System components
5.4.7 Viper Camera Holder (Order no. 8680 J)
5.4.8 Camera Spring Guide (Order no. 8633 J)
5.4.8 Special Cable (Order no. 9181 L)
0.8 m, for the connection of the Camera rod to the monitor.
5.4.9 Camera rod
Camera rod black, flexible, 6 mm Ø, 5 m long
Camera rod black, flexible, 6 mm Ø, 20 m long
Camera rod black, flexible, 6 mm Ø, 30 m long
Camera rod red, stable, 7 mm Ø, 5 m long
Camera rod red, stable, 7 mm Ø, 20 m long
Camera rod red, stable, 7 mm Ø, 30 m long
30 Hotline:+49 29 53 / 73 211
The camera holder provides a connection cable
and a M 10 thread and therefore can easily be
connected to our cleaning rods. The camera
is in a protective cage and faces down, so that
incidental daylight does not cause problems.
Attached to rods both, horizontal and vertical
pipes can be examined.
For centering of the camera head in vertical
vents. A stainless steel spring prevents a ro-
tating and oscillating of the camera head. The
spring is adjustable to the tubing size.
(Order no. 7821 J)
(Order no. 7818 J)
(Order no. 7819 J)
(Order no. 7305 J)
(Order no. 7829 J)
(Order no. 7306 J)
Fax: +49 29 53 / 73 250
Camera Viper VIS 2000