Specification - Wohler VIS 2000 Handbuch

1. Specifikation
1.

Specification

The video inspection system is ideal for the optical control and examination of horizontally
and vertically running exhaust systems (modern chimneys) as well as for sewers and ven-
tilation systems with a diameter from 40 mm Ø. The compatible system components offer
various individual solutions which are perfectly convenient for the corresponding job.
The camera viper described in this manual is used for the transport and the handling of
camera rods up to 30 m during the inspection. Viper stand, belt attachment and retractable
grip offer three diferent possibilities of handling, depending on the working conditions.
If the user decides to carry the viper at the belt or to put it on its feed, his hands will be
free for working with the monitor and the rod. Horizontally and vertically running exhaust
systems will be controlled simply and quickly.
The integrated metric marking with a high resolution of 0.05 meters and a zero-setting
button enables an exact determination of the position of the defect as well as the measu-
rement of distances in the exhaust system.
Technical Data:
Basket-Ø:
Width :
Transmittance:
Weight:
Connection cable:
Integrated metric marking:
Functional principle:
Resolution:
Measuring Range:
Buttons :
Stand-by
e-mail: mgkg@woehler.com Internet: http://mgkg.woehler.com
42 cm
10 cm
up to 30 m
2000 g (without rod)
2.5 m long
digital
0,05 m
0 - 30,00 m
Reset, input of parameters
LED
Camera Viper VIS 2000
21