Operation - Wohler VIS 2000 Handbuch

2. Operation

2. Operation
2.1 Controls
3
8
1
Figure 2.1: Controls
2.2 Operation
2.2.1 Connection of the camera heads
All camera-heads are connected via a clutch socket with 8 poles to the camera viper
(cable jack with 8 poles).
Plug camera head and camera cable together and then turn the thread clockwise for
closing the screw connection tightly.
2.2.2 Connection of the monitors
Stick the cable connection (fig. 2.1, part 9) to the socket of the monitor.
2.2.3 Inspection of exhaust systems
The camera viper VIS 2000 can be used for the inspection of horizontally and vertically
running exhaust systems. In both cases you can work two different ways.
22 Hotline:+49 29 53 / 73 211
2
9
6
5
4 7
1 Operation button (Reset to
zero, input of parameters)
2 Cabel support
3 Jacket protection
4 Collapsible stand
5 foldable grip
6 Rod duct
7 Belt support
8 Adjusting screw for free-wheel
bracket
9 Cable connection to the mo-
nitor
Fax: +49 29 53 / 73 250
Camera Viper VIS 2000