Milnor MWF63Y7 MilTouch Bedienerhandbuch Seite 10

1 Preface
BNCLJS01 / 2021204
1.1 About This Operator Guide and This MilTouch™
Washer-extractor
This operator guide applies to the following machine model(s):
• MWF63Y7
• MWF77Y7
• MWF100Y7
• MWF125Y7
This operator guide explains routine operation. It is for the operator and for supervisory personnel
responsible for operator training. The machine must be fully commissioned and ready before you
attempt to operate it. A separate controller reference manual is available from Milnor for use by
technicians involved in the commissioning, programming, and servicing of the machine.
WARNING: Careless use — can cause death or serious injury and property damage.
This MilTouch™ industrial washer-extractor has one or more physical switches and buttons
(electromechanical controls), as well as a touch-sensitive display screen with virtual controls.
Use the electromechanical controls to apply power, unlock the door, stop the machine immedi-
ately (if necessary), and load and unload the machine. Use the touch-actuated controls on the Mil-
Touch™ display screen to select, run, and monitor formulas.
Pellerin Milnor Corporation
Read the machine manuals before you install, operate, service, or clean
�
the machine.
Do not attempt to service the machine or reach into normally-guarded
�
areas unless you are a qualified service technician.
BNCLJS01 0000212827
BNCLJS01.C01 0000212826 D.2 5/12/21, 8:47 AM Released
5/12/21, 9:02 AM Released
3