Geberit FLOWFIT Bedienungsanleitung Seite 4

Safety notes
CAUTION
Risk of injury caused by flying parts
▶ Do not exceed the maximum test
pressure.
▶ Ensure compliance with country-
specific regulations governing
pressure tests.
▶ Replace worn O-rings.
Intended use
For monitored pressure tests of Geberit FlowFit
and Geberit PushFit piping systems using the
following test media and test pressures:
• With cold water p
• With air p
4
= 15 bar/1500 kPa
max
= 3 bar/300 kPa
max
18014404737917451 © 11-2023
997.065.00.0(03)