Dmx-Protocol - Futurelight PHW-250 Bedienungsanleitung

2. If the lamp is on, the the display will show "A00.1" with the actually set address. If the lamp is off, the the
display will show "A001" with the actually set address.

DMX-protocol

Control channel 1 - Horizontal movement (Pan) (within 630°)
Push slider up in order to move the head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be
stopped at any position you wish.
Control channel 2 - Vertical movement (Tilt) (within 265°)
Push slider up in order to move the head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be
stopped at any position you wish.
Control channel 3 - Pan/Tilt-speed
DMX-value Feature
0-14 Maximum speed
15-225 Decreasing speed
226-235 Blackout with Pan/Tilt-movement
236-245 Blackout with colour-change
246-255 No function
Control channel 4 - Colour-wheel 1
Linear colour change following the movement of the slider. In this way you can stop the colour-wheel in any
position.
DMX-value Feature
0-25 Open/white
26-51 Deep red
52-77 Blue
78-103 Green
104-127 Orange
128-189 Forwards rainbow effect with decreasing speed
190-191 No rotation
192-255 Backwards rainbow effect with increasing speed
Control channel 5 – Cyan
DMX-value Feature
0-255 Cyan (0=white, 255=cyan)
Control channel 6 – Magenta
DMX-value Feature
0-255 Magenta (0=white, 255=magenta)
Control channel 7 – Yellow
DMX-value Feature
0-255 Yellow (0=white, 255=yellow)
Control channel 8 – Effect-wheel
DMX-value Feature
0-70 Full beam
71-230 Beam shaper
231-255 Frost filter
36/91 51838700X18NXS_V_1_3.DOC