Description Of The Device; Features - Futurelight PHW-250 Bedienungsanleitung

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature t = 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION OF THE DEVICE

Features

Multi-function Washlight
DMX-controlled operation or stand alone operation with Master/Slave-function • Sound-controlled via built-in
microphone • 48 preprogrammed scenes in Program Run for stand alone operation • Number of scenes in
Program Run can be changed individually • The scenes in Program Run can be modified via the Control
Board or via an external controller and loaded into the memory • CMY colour mixture • Motorised colour-
wheel with additional 4 discrete dichroic filters plus open • Switchable colour change (mode 1: only full
colours, mode 2: colour-change at every position) • Rainbow-effect with adjustable speed in both directions •
Macro-function for combinations between CMY-colour mixture and colour-wheel • Frost-filter for softer beam
• Beam-shape effect: wide and flat beam can steplessly be rotated by 180° • Strobe-effect of 1-13 flash per
sec. • Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-
Reverse, Program, Reset, lamp on/off • Remotely switching of the lamp • Built-in demo sequence •
Preprogrammed variable/random strobe and dimmer pulse effects • Black-out while Head moving or
CMY/colour/beam-shaping changing • Remotely controllable speed of PAN /TILT movement for easy
programming • Remote reset function • Motorized zoom • Mechanic dimmer • Exact positioning via 16 bit
Pan/Tilt movement resolution • For MSD 250 or MSD 250/2 or MSD 200 lamp • DMX-control via every
standard DMX-controller
28/91 51838700X18NXS_V_1_3.DOC