Cameo FLAT PRO FLOOD IP65 TRI Bedienungsanleitung Seite 15

NOTE / HINWEIS / PRÉCISION / NOTA / WSKAZÓWKA / NOTA
EN
An extensive selection of suitable IP65 DMX extension cables, IP65 power extension cables and adapter cables is available on the Internet at
www.cameolight.com.
DE
Eine umfangreiche Auswahl an passenden IP65 DMX-Verlängerungskabeln, IP65 Netzverlängerungskabeln und Adapterkabeln finden Sie im Internet
auf www.cameolight.com.
FR
Vous trouverez un choix complet de rallonges DMX certifiées IP65, de rallonges secteur certifiées IP65 et de câbles adaptateurs sur Internet, à
l'adresse www.cameolight.com.
ES
En la web www.cameolight.com encontrará los correspondientes cables de extensión DMX IP65, alargadores de alimentación IP65 y cables
adaptadores.
PL
Na stronie internetowej www.cameolight.com dostępny jest kompleksowy wybór przedłużaczy DMX, przedłużaczy sieciowych i kabli do
adapterów ze stopniem ochrony IP 65.
IT
Sul sito internet www.cameolight.com è reperibile un'ampia gamma di cavi di prolunga DMX IP65, cavi di prolunga di rete IP65 e cavi
adattatori.
OPERATION / BEDIENUNG / UTILISATION / OPERACIÓN / OBSŁUGA / UTILIZZO
EN
NOTE
When the projector is properly connected to the mains, the following information appears successively on the display during the startup process:
"Update Wait ..." (only for service purposes), "WELCOME TO cameo" and the software version "SOFTWARE V1.xx". After this operation, the projector
is ready for use and changes to the mode that was previously selected.
STATIC COLOUR (STATIC)
This mode offers the ability to separately adjust the intensity for each of the 3 LED groups and to generate an
unlimited number of different colours (colour mixing). Press the MODE button repeatedly until "STATIC" appears in
the upper line of the display. By repeatedly pressing the ENTER button, select the LED group for which you want
to change the brightness level (please note the cursor on the display, Rxx = red, Gxx = green, Bxx = blue). Now
you can set the intensity of the selected light from 00 to 99 using the UP and DOWN buttons (example: R00 = red
at 0%, i.e. out. R99 = red at 100%, i.e. maximum brightness). Adjust the flash frequency of the strobe effect by
pressing ENTER repeatedly until the cursor shows "Fxx". Now you can activate the strobe effect using the UP and
DOWN buttons and set the flash frequency from 00 to 99 (F00 = strobe effect deactivated, F01 = approx. 1 Hz,
F99 = approx. 20 Hz). Confirm with ENTER.
Red
Green
Blue
Strobe effect
COLOUR MACROS (MACRO)
In this mode, one of the 3 basic colours of the projector or one of the 4 different mixed colours can be selected
as a preset. Press the MODE button repeatedly until "MACRO" appears in the upper line of the display. Now press
ENTER and then select one of the 7 colour presets using the UP and DOWN buttons. Confirm with ENTER.
MACRO 01
MACRO 02
MACRO 03
MACRO 04
MACRO 05
MACRO 06
MACRO 07
COLOUR CHANGE (JUMPING)
In the colour change mode (Jumping Mode), 7 different colours alternate in rapid succession (red, green, blue,
yellow, magenta, cyan, white). The speed of the program is adjustable separately and a stroboscope effect can
also be activated. Press the MODE button until "JUMPING" appears in the upper line of the display. Now, press
ENTER until the cursor appears in the lower line of the display, and then select the rate (SPEED) using the UP and
DOWN buttons, with the colours alternating from 00 to 99. Confirm with ENTER. The indicator in the bottom line
of the display changes to "FLASH:xx". The cursor will appear in the bottom line at the same time and you can
activate the stroboscope effect using the UP and DOWN buttons and adjust the strobe frequency from 00 to 99
(FLASH:00 = strobe deactivated, FLASH:01 = approx. 1 Hz, FLASH:99 = approx. 20 Hz). Confirm with ENTER.
Intensity R00 - R99
Intensity G00 - G99
Intensity B00 - B99
Speed F00 - F99
Red
Green
Blue
Yellow
Magenta
Cyan
White
15