Unit Description; Changing The Battery; Measuring The Wake-Up Temperature - uebe cyclotest lady Gebrauchsanleitung

Unit description

Battery compartment cover
On/Off button
Display
Flexible sensor tip
Sensor

Changing the battery

Change the battery when the battery
symbol flashes in the display:
To do so, pull off the battery compart-
ment cover towards the rear.
Carefully pull the battery holder about
1 cm out of the casing.
Do not use a metal object to push the
battery out of its holder.
Insert a new battery (type LR41 or
SR41, 1.55 V), with the + sign towards
the top.
Push the battery holder back into
the casing and replace the battery
compartment cover. Take care not to
damage or misalign the seal when
doing this.
Measuring the wake-up
temperature
Take the measurement wherever
possible at roughly the same time of
day, immediately after waking up, but
before getting up.
Before measuring, you should have
slept for at least 5 hours. If you have
had an insufficient period of sleep,
skip the measurement and do not
enter a measured value.
Prior to measurement do not eat and
avoid physical exertion.
You can take the measurement orally,
rectally or vaginally, but you should
then stick to the point of measure-
ment you have chosen. Measuring
under the arm (axillary) produces
inaccurate results. It is therefore un-
suitable for measuring the basal body
temperature.
We recommend that you take the
measurement under your tongue with
your mouth closed. Place the sensor tip
in one of the two heat pockets under
your tongue to the left or right of the
root of the tongue. The sensor must
make good contact with the tissue.
Close
easily through your nose so that
the
compromised by inhaled air.
EN-20 EN-21
your mouth
measurement
and breathe
result is not