Control Panel; Temperature Setting Buttons - AEG SANTO 80368-5 KGL Benutzerinformation

Control panel

A B C
A ON/OFF button
B Fridge section indicator
C Temperature indicator for fridge section
D Buttons for setting temperature for fridge section
E Thermometer indicator for fridge section (with COOLMATIC)
F MODE button for setting the operating mode
G Text display
H RESET button
I Freezer section indicator
L Temperature indicator for freezer section
M Buttons for setting temperature for freezer section
N Thermometer indicator for freezer section (with FROSTMATIC)

Temperature setting buttons

The temperature is adjusted using the „+" (WARMER) and „-" (COLDER) but-
tons.
These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the DESI-
RED temperature (Temperature display flashes) by pressing one of the two
buttons, „+" (WARMER) or „-" (COLDER).
• Each time one of the two buttons is pressed again the DESIRED tempera-
ture is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically swit-
ches back after a short period (approx. 4 sec.) to the display of the ACTUAL
38
Downloaded from Fridge-Manual.com Manuals
MODE
D E F
RESET
I L
G H
N
M