Bt Go Uni; Charging - Midland BT GO Bedienungsanleitung

BT GO UNI

Place both speakers in the deep ear pocket of your
helmet. You can fix the speakers using the velcro pad.
In the box you will find the velcro pad for the right
speaker.
Place both speakers as much as possible close and cen-
tered to your ear.
Place the wired microphone in front of your mouth
using the adhesive Velcro pad.
If you are using the half-boom microphone, fix the
midlandeurope.com
boom on the left side and keep the sponge as closely
as possible to your mouth when wearing the helmet. Be
sure the white arrow is facing your mouth.
Place the external button on the left side of your hel-
met using the 3M adhesive
You can hide the speaker wire under the helmet pad-
ding

Charging

You can charge your BT GO using any standard USB
wall adapter or PC port connecting to the microUSB
port
Only the USB cable is supplied inside the box. It takes
about 2 hours to fully charge.
MICRO USB PORT
15