Herunterladen Diese Seite drucken

BEGA 99 282 Gebrauchsanweisung

Aufsatzleuchte

Werbung

01.21 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Aufsatzleuchte
Pole top luminaire
Luminaire tête de mât
Gebrauchsanweisung
Anwendung
Aufsatzleuchte mit freistrahlender
Lichtstärkeverteilung.
Weiches gestreutes Licht durch eine weiße
schlagfeste Kunststoffkugel.
Zur Beleuchtung von Wegen, Parkanlagen
und Fußgängerbereichen im privaten und
öffentlichen Raum.
Für Lichtpunkthöhen von 1700 mm.
Produktbeschreibung
Leuchte besteht aus Aluminiumguss,
Aluminium und Edelstahl
Beschichtungstechnologie BEGA Unidure
Kunststoffkugel weiß
Für Mastzopf ø 48 mm
Einstecktiefe 30 mm
Anschlussklemme und
Schutzleiterklemme 2,5@
Zugentlastungsschelle
Fassung E 27
Schutzklasse I
Schutzart IP 44
Schutz gegen Eindringen fester Fremdkörper
≥ 1 mm und Spritzwasser
Schlagfestigkeit IK10
Schutz gegen mechanische
Schläge < 20 Joule
r – Sicherheitszeichen
c  – Konformitätszeichen
Horizontale Windangriffsfläche: 0,07 m²
Gewicht: 1,2 kg
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Die Montage und Inbetriebnahme darf nur
durch eine Elektrofachkraft erfolgen.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
Instructions for use
Application
Pole top luminaire with unshielded light
distribution.
Soft diffused light through white impact
resistant synthetic diffuser.
For lighting paths, parks and pedestrian
precincts in private or public sectors.
For mounting heights 1700 mm.
Product description
Luminaire made of cast aluminium,
aluminium and stainless steel
BEGA Unidure
coating technology
®
®
White synthetic sphere
For pole top ø 48 mm
Slip fitter insert depth 30 mm
Connecting terminal and
earth conductor terminal 2.5@
Strain-relief clamp
Lampholder E 27
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK10
Protection against mechanical
impacts < 20 joule
r – Safety mark
c  – Conformity mark
Horizontal wind catching area: 0.07 m²
Weight: 1.2 kg
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
48
Fiche d'utilisation
Utilisation
Luminaire tête de mât à diffusion lumineuse.
Lumière douce et diffuse grâce à la vasque
synthétique blanche.
Pour l'éclairage d'allées,de parcs et de zones
piétonnières dans le secteur privé ou public.
Pour hauteurs de feu 1700 mm.
Description du produit
Luminaire fabriqué en fonderie d'aluminium,
aluminium et acier inoxydable
Technologie de revêtement BEGA Unidure
Boule blanche en matière synthétique
Pour tête de mât ø 48 mm
Profondeur d'embout 30 mm
Bornier et borne de mise à la terre 2,5@
Collier anti-traction
Douille E 27
Classe de protection I
Degré de protection IP 44
Protection contre les corps solides
≥ 1 mm et les projections d'eau
Résistance aux chocs mécaniques IK10
Protection contre les chocs
mécaniques < 20 joules
r – Sigle de sécurité
c  – Sigle de conformité
Prise au vent horizontale : 0,07 m²
Poids: 1,2 kg
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
L'installation et la mise en service ne doivent
être effectuées que par un électricien agréé.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant.
99 282
r
é
c
IP 44
®
1 / 2

Werbung

loading

Inhaltszusammenfassung für BEGA 99 282

  • Seite 1 Leuchte vorgenommen, so gilt derjenige als manufacturer. considéré comme étant le fabricant. Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 2...
  • Seite 2 63 000 105 Douille 63 000 105 Dichtung 83 000 538 .1 Gasket 83 000 538 .1 Joint 83 000 538 .1 2 / 2 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...