Werbung
Verfügbare Sprachen
Verfügbare Sprachen
System
Restore factory default
You have the option to reset all settings and changes made by loading the factory settings. To acti-
vate the setting you need to enter your password and confirm with OK.
Note:
All settings will be set to the original factory settings. You need to execute another scan
mode.
Information
You can access information regarding the software and hardware via this option.
Software update
If required new firmware as well as an installation manual will be available at www.xoro.de. Refrain
from installing software from other sources.
Troubleshooting
Problem
-Not all expected channels
are found
-No reception
-Image interferences with
distortions and images
frozen on screen
No image / no color image
No audio
Wrong language: audio or
subtitles
USB-device cannot be
recognized
Device shows the wrong
time
The Receiver turns off
after 3 hours
Image is too small or dis-
torted
-The stick doesn't work
- The LED on the stick
does not light up
EN 16
Settings & Troubleshooting
Solution
No DVB-T/T2 reception in your area.
Direct your antenna correctly
Repeat the channel search (see page 13)
Buy a more powerful antenna
Activate the power supply for your antenna (see page 5, 8,
14).
Check the connection with your TV
Check your video settings (page 13, V-FORMAT-key, see
page 7).
Turn up the volume (VOL +)
Check the connection with your TV.
The receiver does not support the audio format of the file /
audio track
Press the AUDIO key to select among the available audio
tracks
Press the SUB-T key to select subtitles if available.
The USB-socket at the connection cable provided is solely
for software updates. See page 2 and 3.
Please refer to the details on page 14, Time zone settings
See page 14, Setting Auto-Stand By
See page 13, 10, (Aspect ratio, ASPECT-key)
The stick is not getting power. Please refer to the details on
page 5-7.
Werbung
