Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Make sure the receiver stick is properly connected as described on the previous pages.
Select
the
See the televisions manual for details.
After you've selected the source make sure the power supply LED on the receiver stick
lights up (see page 5-6).
Once the receiver is powered the booting up process takes 15-20 seconds.
If everything is connected properly, the right signal
source has been selected and the power supply LED on
the receiver stick lights up, you will see the following
XORO installation menu on the TV screen.
Use the arrow keys ▲/▼ to navigate among menu
items.
If a menu item is highlighted you can use the ◄/► keys
to make changes.
OSD Language:
Set the OSD language.
Country
Select the country in which the receiver is to be operated.
Antenna Power
In case your antenna needs to be supplied with power (e.g. an indoor antenna with an amplifier but
no power supply unit) by your receiver you need to activate this function in the menu.
Channel Search
Initiate the scan mode by pressing OK. It can take a cou-
ple of minutes to complete the scan.
In case not all channels appear in the list after the scan
you need to readjust the antenna or use a more powerful
antenna and repeat the scan mode (see page 13).
Note:
In Germany no DVB-T/T2 radio channels are
transmitted.
After moving to another region you have to repeat
the scan mode.
EN 8
HDMI-port
connected
First steps
with
the
receiver
stick
as
signal
source.
Werbung
