Xoro HRT 7610 Bedienungsanleitung Seite 24

1. Attach the adapter onto the antenna jack (5)
2. Connect the antenna cable with the antenna jack.
3. Connect the remote control receiver with the jack (3). Place the receiver at the front of your
TV. The receiver needs to be in direct line of sight of the remote control
4. The HDMI stick (4) can be directly connected to the TV. If there is too little space use the
HDMI extension cord supplied.
5. Insert the USB connection cable into the USB port. Attach the other end with a free USB port
on your TV. The stick is switched on as soon as powering is supplied. The LED (2) switches
on.
HDMI plug for a connection
with the TV
EN 6
HDMI-extension cord
USB plug for power supply via an USB port
on the TV
Installation
Antenna jack adapter
Remote control receiver
USB port for soft-
ware updates