Changing The Time - Hanseatic Tc925B2F-Sdee Gebrauchsanleitung

The minute reading will start to flash on the
display (2).
4. Set the minutes using the
buttons.
5. Press the button (20) one more time.
The indicator stops flashing; the time has
been set.
Press the button (21) to cancel
the time-setting process. The previ-
ous setting will remain in place.

Changing the time

To change the time (e.g. when changing from
GMT to BST), follow the steps described in
"Setting the time".
General operating instructions
Using the clock as a timer
You can also use the appliance's clock ("egg
timer") as a timer.
1. Press the clock
(18) or (19)
A beep will sound and the display (2) will
show the
2. Set the desired time with the
The maximum time which can be set is
95:00 minutes.
3. Press the
There is a countdown for the time which
has been set. When the countdown reach-
es zero, 5 beeps will sound.
button (20).
indicator.
00: 0 0
(19) buttons.
button (17) to start the timer.
Press the button (21) to cancel
the timer before it is finished.
A beep will sound and the dis-
play (2) will show the time again.
Page EN-19
(18) or