Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. RECOGNISING AND REPAIRING OF MISTAKES
Problem
The pump won't start
The suction of the
pump is not working
Reduced flow
10. NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if
no changes were made to the equipment. If repairs are carried out by our authorized service, we are only liable if
original spare parts and accessories were used.
11. NOTES ON DISPOSAL
Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to be
disposed in your household garbage. We are registered at the German registration department EAR under
the WEEE-No. DE79535656. This symbol means, that you're not allowed to treat this product as a regular
household waste item – it has to be disposed at a recycling collection point of electrical devices. This is the
best way to save and protect our earth.
THANK YOU FOR YOUR SUPPORT!
12. EU DECLARATION OF CONFORMITY
The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the products named overleaf,
namely Diesel EXELENZ-3.2, Diesel STANDARD-4.2, Diesel STANDARD-4.2 Automatic, Diesel STAR 160-4.2, Diesel STAR 160-4.12
Automatic, Diesel STAR 160-4.2 Automatic, Diesel STAR 160-4.2 Stainless Steel Automatic, EASY Diesel Tank Station as placed
on the market, comply with the relevant provisions listed below, the relevant EU harmonised directives and the EU
standard for safety. This declaration of conformity applies insofar as no modifications are made to the product. The
sole responsibility for issuing this declaration of conformity lies with the manufacturer.
The sole authorised person to keep the technical documents: Amur S.à r.l. - 36, Rue de la Gare - L-5540 Remich
EU Machinery Directive (2006/42/EC)
Low Voltage Directive (2014/35/EU)
EC Electromagnetic compatibility directive (2014/30/EU)
The following harmonized standards:
EN IEC 61326-1:2021
EN 55011:2016+A2:2021
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A2:2021
Signed for and on behalf of:
Possible causes
No power supply
Impeller jammed
Motor malfunction
Leak in suction lines or
connections
Motor carbon brush used
up
Tank liquid level too low.
By-pass valve jammed
Air in the suction tube
Filter clogged
Leakage of Diesel oil.
The suction tube is resting
on the bottom of the tank.
Excessive suction height.
Amur S.à r.l.
Remich, 19.03.2024
i.V. Dipl. Phys. Peter Neumüller
Technical Manager
Solutions
Check the clamps and safety devices
Check for signs of damage and clogging. Reassemble.
Contact your dealer.
Check the suction pipe and all connections for tightness. Fill the
suction hose and the pump. Suction hose must be laid in a con-
stantly rising, so that air bubbles can escape towards the pump
Contact your dealer.
Fill up the tank.
Clean and re-assemble
Make sure that the suction tube is not damaged
Clean the filter.
Check the connectors and gaskets.
Raise the tube in the tank.
Lower the level of the pump.
English 5
Werbung
