Samsung SCC-B5313 Benutzerhandbuch Seite 10

❚
To check the camera view and set the switches
1. Remove the Cover dome. For more details about the removing procedures, see "Installation
2. Adjust the function of your camera using the Switch board while you are viewing the image
10
AB68-00647D(01)Eng.indd
All manuals and user guides at all-guides.com
Connecting cables and setting switches
procedure," in the Installing camera section on the next page.
on the screen.
10
Monitor
BNC Cable
To connect cables
1. Connect the BNC cable
to the Video connector
attached on your camera.
2. Connect the BNC cable
to the Video Input on a
monitor.
3. Connect the power
adapter to the Power
connector attached on
your camera. When the
monitor is turned on, the
camera image appears.
2007-05-14 ｿﾀﾈﾄ 4:33