Easee Base 4-Way Benutzer- Und Installationsanleitung Seite 3

Introduction
Easee Base
The Easee Base is a modular charging post for mounting
up to four Easee Charging Robots.
With Easee Base, it is possible to choose between
multiple configurations: 1-Way setup, where only one
charger is mounted; 2-Way setup, with two chargers;
and 4-Way setup, with up to 4 chargers installed.
With multiple configurations in one design, they share
many common parts. Only a few parts are specific to
each type of layout.
Conventions
This symbol indicates that the respective
instructions must only be carried out by an
authorised electrician.
This symbol indicates an immediate danger to
life and health of individuals due to the effects
of electrical energy. Non-observance of these
instructions will result in serious damage to
health – up to and including life-threatening
injuries.
Technical
specifications
General
Dimension (mm): H: 1500 x W: 186 x D: 186
Weight: 6.1–7.7 kg
Material: Aluminium and stainless steel (adapter plate/
mounting plate)
Finish: Powder coating
Colour: Black
IP degree: IP44
Insulation class: I (with Power Rail)
Impact resistance: IK10
Features
Adapter plate for c/c 160 mm foundation
45 degree rotation intervals (using the adapter plate)
Screws and nuts included
Adapter plate supports 22 mm bolts
Electrical connection
Connection via Power Rail requires the circuit to be RCD
protected
It's possible to connect multiple charging posts in series
Cable size
Maximum support of 16mm
ferrules and 25mm solid conductors
2
Cable length between Power Rail and chargers: 135 cm
Conductor material: CU or ALU
flexible conductors with
2
3