Sunny Health & Fitness PERFORMANCE INTERACTIVE Serie Benutzerhandbuch Seite 7

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907- 8669).
, , , ,
STEP 4
Remove the preassembled 4 Screws
(No. 31) from the Meter (No. 66) with
Spanner (No. 109).
Connect the Pulse Extension Wire 2
(No. 65) with Meter Wire A (No. 66a), and
connect the Sensor Extension Wire (No.
62) with Meter Wire B (No. 66b).
Attach the Meter (No. 66) to the bracket
of the Handlebar Post (No. 4) with 4
Screws (No. 31) that were just removed
using Spanner (No. 109).
NOTE: To avoid damaging the wires,
please insert them inside the Handlebar
Post (No. 4) before securing the Meter
(No. 66) onto the bracket.
Remove 2 Arc Washers (No. 19), 2
Spring Washers (No. 26) and 2 Screws
(No. 17) from Handlebar Post (No. 4)
with Allen Wrench (No. 110).
Attach the Armrest (No. 7) to the bracket
of the Handlebar Post (No. 4) with 2 Arc
Washers (No. 19), 2 Spring Washers
(No. 26) and 2 Screws (No. 17) that were
just removed with Allen Wrench (No.
110).
6