Sunny Health & Fitness PERFORMANCE INTERACTIVE Serie Benutzerhandbuch Seite 5

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907- 8669).
ASSEMBLY INSTRUCTIONS
, , , ,
, , , ,
STEP 1
Remove the 2 Paper Tubes (No. E) from
the Main Frame (No. 1)
Remove the 4 Carriage Bolts (No. 20),
4 Arc Washers (No. 19) and 4 Cap Nuts
(No. 22) from the Front Stabilizer (No.
2) and the Rear Stabilizer (No. 3) using
Spanner (No. 109).
Attach the Front Stabilizer (No. 2) and
the Rear Stabilizer (No. 3) to the Main
Frame (No. 1) with 4 Carriage Bolts
(No. 20), 4 Arc Washers (No. 19) and 4
Cap Nuts (No. 22) that were just
removed using Spanner (No. 109).
STEP 2
Align the Left Pedal (No. 37L) with the
left side of Crank (No. 42) at 90° and
gently insert the pedal into the crank arm.
Turn the Left Pedal (No. 37L)
counter-clockwise as tightly as you can
with your hands, then use Spanner (No.
109) to tighten securely.
Align the Right Pedal (No. 37R) with the
right side of Crank (No. 42) at 90° and
gently insert the pedal into the crank arm.
Turn the Right Pedal (No. 37R)
clockwise as tightly as you can with your
hands, then use Spanner (No. 109) to
tighten securely.
NOTE: Left Pedal (No. 37L) is marked
with "L" on the pedal, while Right Pedal
(No. 37R) is marked with "R" on the
pedal. Attaching the Left & Right Pedals
(No. 37L & No. 37R) to the wrong side of
Crank (No. 42) or turning them with the
wrong direction will damage the Crank
(No. 42).
4