Sunny Health & Fitness PERFORMANCE INTERACTIVE Serie Benutzerhandbuch Seite 6

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907- 8669).
STEP 3
Connect the Pulse Extension Wire 2
(No. 65) to the Pulse Extension Wire 1
(No. 64) and connect the Sensor Wire
(No. 61) to the Sensor Extension Wire
(No. 62). Then connect Tension Hook
(No. 60) with Tension Cable (No. 59b) as
shown in Diagram A.
NOTE: Make sure the Tension
Controller (No. 59a) is at the lowest level
before you connect the cable. This
ensures the cables are at their longest
point. We recommend the assistance of a
second person to help hold the
Handlebar Post (No. 4). This will make
the connection easier when you are
attaching Tension Hook (No. 60) to the
Tension Cable (No. 59b).
Remove 4 Arc Washers (No. 19), 4
Spring Washers (No. 26) and 4 Screws
(No. 17) from Main Frame (No. 1) using
Allen Wrench (No. 110). Insert the
Handlebar Post (No. 4) into the post of
the Main Frame (No. 1), secure with 4
Arc Washers (No. 19), 4 Spring
Washers (No. 26) and 4 Screws (No. 17)
that were just removed using Allen
Wrench (No. 110).
NOTE: Ensure that all bolts and washers
are in place and partially threaded in
before completely tightening any of them.
5