Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
switching off the kettle
The kettle switches off automatically when the water boils.
The indicator led switches off. If you want to boil the water
once more, wait approx. 30 seconds before switching it on
again to allow the switch to cool down. It is also possible
to switch off the kettle at any time by means of the on/off
switch. When the kettle is taken off the connection base
while boiling, it will also switch off. When placing back the
kettle on the connection base, wait approx. 30 seconds
before switching it on again to allow the switch to cool down.
Caution! It is possible that a little condensed water remains
on the edge of the connection base. This is normal and does
not affect the function of the water cooker.
6
water temperature gauge
The water temperature gauge constantly shows you the
temperature of the water inside the kettle. Use the gauge
when you are making drinks that require different water
temperatures like green teas, white teas, coffee, etc. The
gauge will not work if there is insufficient water in the kettle.
7
de-scaling
Scale may occur on the inside of the kettle. If you have hard
water, it may be necessary to de-scale the kettle occasionally.
Use a suitable de-scaling agent for kettles/coffee machines
and observe the accompanying instructions.
You can also de-scale the kettle with lemon juice. The lemon
acid in this juice will make sure that the scale is removed.
This natural method prevents the use of chemicals. Fill half the
kettle with hot water. Add the juice of half a lemon. Boil the water
and then allow the water to cool down for 30 minutes. Throw
away the boiled water and rinse the kettle once more. Never
clean the appliance with cleaning agents. These could damage
your kettle.
In order to remove the anti-scale filter from the kettle for
cleaning, you must take the kettle from the connection base and
allow it to cool down. Do not remove the anti-scale filter from
the kettle if it is still hot or filled with water. Pull the anti-scale
filter loose towards the rear, away from the spout, and clean
it with hot water. When placing back the filter, make sure it is
properly attached to the spout. First place the point of the anti-
scale filter and then you can press tight the anti-scale filter at
the top by means of the clamp. Never place the anti-scale filter
loose in the kettle.
12
•
English
8
cleaning & maintenance
Regularly clean the kettle for optimum performance. Never
submerge the kettle and connection base in water and/or
other liquids. Before cleaning, always remove the plug from
the socket and allow the kettle to cool down. Regularly wipe
the outside with a moist cloth. Never use detergents or
abrasive cleaning agents!
Werbung
Inhaltsverzeichnis
