Herunterladen Diese Seite drucken

Beko BBIM13500XPSW Bedienungsanleitung Seite 28

Einbau-backofen

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5. Go back to the main menu screen by
touching "Back" on the screen.
Wireless Network
Open
Back
Installing HomeWhiz application
1. While in the settings menu; touch the
"Wireless Network O." field on the
screen.
Wireless Network
Wireless Network O.
Language
2. While the "Wireless Network O." field is
active, touch the "Start the installation"
field.
Wireless Network O.
Start the installation
Back
ð On the screen, Step 1/2 stage ap-
pears.
Step 1/2
Open HomeWhiz via your
mobile device
3. Touch "Add Oven" field in the "Add
Device" field via"HomeWhiz" application.
4. Enter the sku number of your product on
the appearing screen. You can access
the sku number of the product on the
type label by opening the oven door. (10
digit number starting with 77...)
ð While connecting to the home net-
work, Step 2/2 stage appears on
the screen.
Turn Off
5. When you access the main page of the
application, the added product is dis-
played. In order to control the product
remotely, touch " " button, which is
available on the control panel of the
product.
ð You can control the product via
smart device.
"HomeWhiz" application on your
smart device shall direct you about
the establishment of the connec-
tion and the use of the application.
In case of a power failure while the
connection of your appliance
"HomeWhiz" is on and if you are
disconnected, "HomeWhiz" shall
switch to off position automatic-
ally.
When your product is connected to
"HomeWhiz" and the remote control
is activated by touching the "" " "
button, the product cannot be oper-
ated manually. You can turn off the
oven by simply tapping the "" ""
button or activate the key lock by
tapping the "" "" button.
Deleting HomeWhiz application
1. While in the settings menu; touch the
"Wireless Network O." field on the
screen.
EN / 28
Step 2/2
Connecting to the
home network
Wireless Network
Wireless Network O.
Language
EN
DE

Werbung

loading