Kress KG340 Bedienungsanleitung Seite 20

NOISE DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection
VIBRATION INFORMATION
EN
Vibration total values (triax vector sum) determined
according to EN 62841:
20
Typical weighted vibration
Uncertainty
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another.
The declared vibration total valueand the declared
noise emission valuemay also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
L = 59.95 dB(A)
How the tool is used and the materials being cut or drilled.
pA
The tool being in good condition and well maintained.
3.0 dB (A)
The use of the correct accessory for the tool and ensuring
it is sharp and in good condition.
L = 72 dB(A)
The tightness of the grip on the handles and if any anti
wA
vibration and noise accessories are used.
3.0 dB (A)
And the tool is being used as intended by its design and
these instructions
This tool may cause hand-arm vibration syndrome if its
use is not adequately managed.
also take account of all parts of the operating cycle such
as the times when the tool is switched off and when it
a < 2.5 m/s²
is running idle but not actually doing the job. This may
h
significantly reduce the exposure level over the total
K = 1.5 m/s²
working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use should