Kress KG340 Bedienungsanleitung Seite 14

H
B
Beep!
EN
Once activated, hold down Operator Presence Switch,
14
while simultaneously depressing the ON/OFF Trigger to
engage the blades.
A.If the blades are in the MAX cut opening, the product
will beep once;
B.If the blades are not in the MAX cut opening, the
product will beep once and blades will reach the MAX
cut opening.
PROGRESSIVE CUTTIN
I
The blades will naturally return to the open position
when the ON/OFF Trigger is released, while the blades
will get closed once push the ON/OFF Trigger. The
degree of blade's closure will be controlled by the
degree of ON/OFF Trigger's closure.
Note:When the scissors can't cut cause the material is
too hard or too stiff, the product will beep once, then the
scissors return to the open state and stop working.