Orno OR-WE-512 Bedienungs- Und Montageanleitung Seite 5

OR-WE-512
OR-WE-514
OR-WE-515
ORNO-LOGISTIC Sp. z o.o.
ul. Rolników 437
44-141 Gliwice
tel. 32 43 43 110
IMPORTANT!
Before using the device, please read this manual and keep it for future reference. Any repairs and modifications made by yourself will void
the warranty. The manufacturer is not responsible for damages that may result from improper installation or operation of the device.
Due to the fact that the technical data are subject to constant modification, the Manufacturer reserves the right to make changes to the
product characteristics and to introduce other constructional solutions that do not deteriorate the product's parameters and usable values.
The latest version of the manual is available for download at www.orno.pl. All rights to translation/interpretation and copyrights of this manual
are reserved.
The meter should be installed by qualified personnel - people with knowledge of marking and earthing electrical equipment and knowledge of
safety regulations. Improper installation and use may result in an electric shock or fire hazard.
Do not misuse the device.
Store the meter in a dry room.
Do not immerse the device in water or other liquids.
Do not install or operate the device if the housing is damaged.
Do not modify the device or make repairs yourself.
Use only insulated tools.
To avoid electrocution or damage to the meter, turn off the power supply whenever the connection is changed.
Before connecting the power supply voltage, make sure that all wires are connected correctly.
The meter is designed for installation in the "M1" mechanical environment, under conditions of small shocks and vibrations, according to the
directive
MID 2014/32/EU. The meter is designed for installation in the electromagnetic environment "E2" according to 2014/32/EU.
Each farm is a user of electrical and electronic equipment and therefore a potential producer of waste hazardous to humans and the environment due to the presence of
hazardous substances, mixtures and components in the equipment. On the other hand, waste equipment is a valuable material from which we can recover raw materials
such as copper, tin, glass, iron and others.
The symbol of the crossed-out wheeled bin placed on the equipment, its packaging or the documents attached to it means that the product must not be disposed of together
with other waste. The marking also indicates that the equipment was placed on the market after 13 August 2005. It is the responsibility of the user to take the waste
equipment to a designated collection point for proper treatment. Information about available waste electrical equipment collection system can be found at the shop's
information desk and at the municipal/commune office.
Appropriate handling of waste equipment prevents negative consequences for natural environment and human health!
100A single-phase counter with RS-485 port
Single-phase 100A multi-tariff meter with RS-485 port
(EN) Operating and Assembly Instructions
Single-phase counter 100A