Operation; Button Functions; Pedal Resistance; Display Information - Rex Mini Cycle Bedienungsanleitung

Operation

BUTTON FUNCTIONS

Pressing the button allows you to call up individual display
information.
A small arrow marks the respective information that is cur-
rently being displayed.
If you leave the arrow pointing to the SCAN display, the
device will show all information alternately:
ZEIT – STRECKE – KAL – ODO – U/MIN.
If you keep the button pressed for approx. 4 seconds, you
will reset the previous values (except the total distance).
When replacing the batteries, the ODO display is reset
to 0.
GB-20
REX_Trainer_Minicycle12.indd GB-20 REX_Trainer_Minicycle12.indd GB-20
All manuals and user guides at all-guides.com

PEDAL RESISTANCE

You can regulate the respective pedal resistance with the
resistance controller (9). Clockwise revolutions will increase
the pedal resistance and anti-clockwise revolutions will de-
crease the pedal resistance.

DISPLAY INFORMATION

1. KM/H:
2. SCAN:
3. ZEIT:
4. STRECKE:
5. ODO (total distance):
6. KAL (Calories)
7. U/MIN (revolutions per minute):
8. STOP:
The computer indicates the current speed in kilometres
per hour.
If the display arrow points to SCAN, all information is
displayed alternately.
ZEIT – STRECKE – KAL – ODO – U/MIN.
The computer shows you the current workout time (max.
99:59).
The computer shows you the distance you've travelled
(max. 99.99 km).
Displays the total distance you've travelled (99.99 km).
Here the computer displays the calories you have burned
during your workout (max. 999.9).
Here the machine displays the revolutions per minute
(max. 9999).
If the machine is not activated, the display shows the
STOP display. The display switches off automatically after
approx. 4 minutes.
Operation
09.05.12 13:08 09.05.12 13:08