Rollei Compactline 10x Anleitung Seite 61

Settings
To set the flash:
1 . Press the Right button / Flash button .
2 . Press the flash button until the symbol
Press the flash button again until the symbol
the flash LED will flash always .
3 . Press the flash button again until the symbol
the flash LED is always flashing .
4 . The symbol appears on the LCD screen . This activates the automatic flash . This is the
default flash setting .
Note: The LCD screen will display a low battery warning if the battery power is insufficient to
operate the flash .
appears . This turns off the flash function . 3 .
appears on the LCD screen . This means that
appears on the LCD screen . This means that
61