Sony Super Trinitron KV-28WF1D Bedienungsanleitung Seite 64

30
This section explains how to select the output signal from (> 2/-&§) 2 [J and how to
select and view the input. You can use direct access buttons -2) @® Gi to select the
input or the menu system to select input and output.
Selecting Input Signals With Direct Access Buttons
Press =) @ & repeatedly.
Press CO @ to restore the normal TV picture.
Symbol on the screen Input Signal
Audio/video through Euro AV connector
RGB through Euro AV connector
2 Audio/video through Euro AV connector
25) 2 S video through Euro AV connector
233 Audio/video through the phono jacks
S video through the 4 pin DIN
Selecting With the Video Connection Menu
1 Press the MENU button ®.
2 Recs bie Gt green © to
select Ch for "VIDEO CONNECTION"
then press yellow @.
3 Press blue or green @ to select input (for the TV screen) or output (for
(=> 2/-€9 2 [) then press yellow ©.
4 Press red or yellow @ repeatedly to select the desired input or output source then
press OK @.
5 Press the MENU button ® to restore the normal TV picture.
Note: If you select 'AUTO' for output, the output source automatically becomes the same as
the desired input source.
Optional Equipment