Oase Bitron Eco 120 W Gebrauchsanleitung Seite 43

How to proceed:
1. Unscrew the locking screw until it is pushed out by a spring.
– The locking screw cannot be completely unscrewed.
2. Undo the engagement hook.
3. Carefully pull the unit head out of the casing.

For safety reasons, the UVC lamp can only be turned on when the UVC clarifier is properly
installed into the device.
Fitting the unit head
How to proceed:
1. Carefully push the unit head into the casing.
2. Lock the unit head in place with the engagement hook.
3. Screw in the locking screw and hand tighten.
– The unit is only protected from the ingress of moisture if the locking screw is tightened.
EN
BTN0006
BTN0010
43