Take In Modes - LG C2200 Benutzerhandbuch

Camera
7. Memory (
memory status.
n
Note
If the memory is full, "Memory full"
message is popped up and you
cannot save a photo. Create space
by deleting old photos in My photos.
1. Center the desired option menu using the left/right navigation
keys.
2. Select the desired value with the up/down navigation keys.
3. After finishing all the setting, focus on the subject to capture and
press the Camera key or OK key. With a click, the image is
captured and the following menu bar appears.
MMS message MMS message
Save
Delete
n
Note
If Auto save [Menu-8-4-1] is set to On, the captured image is
automatically saved without displaying this menu bar.
(Refer to page 76.)
4. To save the image, center the (
want to save the image, center the (
. You can immediately access My photos by pressing the left
soft key [My photos].
You can also send the image via multimedia message by
selecting ( ). For further information regarding multimedia
message writing, refer to page 50.
[ 74
C2200 User Guide
): Shows the current
) and press . If you don't
) and press
]

Take in modes

You can enjoy taking pictures in diverse preset frames. 7 preset
frames are available. Press the Menu key and select Camera
Take in modes using navigation keys.
Before shooting, you can set the following options.
1. Frame (
preset frames.
2. Image quality (
3. Digital zoom (
4. Tone ( ): Colour(
Back
and white (
preview option
5. Brightness (
menu bar
1. Center the desired option menu using the left/right navigation
keys.
2. Select the desired value with the up/down navigation keys.
3. After finishing all the setting, focus on the subject to capture and
press the Camera key or OK key. With a click, the image is
captured and the following menu bar appears.
MMS message MMS message
Save
Delete
n
Note
If Auto save [Menu-8-4-1] is set to On, the captured image is
automatically saved without displaying this menu bar.
(Refer to page 76.)
[ 75
C2200 User Guide
Camera
Menu-8-2
): Select the desired one from 7
): Fine/ Normal/ Basic.
): x1, x2, x4
)/ Sepia( )/ Black
)
): -2, -1, 0, +1, +2
]