Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15. Sealing element:
Teflon-coated heating element which is hot and seals the bag.
16. Bag Cutter:
Press and slide in one direction or vice versa to cut bags to the desired size.
17. Cutter rack: This is a cutter support where the cutter slides along.
18. Front handle: Press the handle down to easily lock the cover into the base or lift
the handle to open the cover.*Do not lock the handle when the product is not used to
avoid deforming the gasket.
OPERATING INSTRUCTIONS
I. Making a bag with bag roll
1. Open the machine and locate the bag roll
storage area,then check if you have an
available bag roll inside.
2. Put out the end of the bag roll to the desired
length underneath the cutter rack.Press and
slide the bag cutter from one side to another
to cut the bag according to the desired size.
* If you have a pre-cut bag,it can work with
the machine directly.
3. Put one end of the bag on top of the sealing
element without reaching the vacuum
chamber.
8
Werbung
