Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CONFIGURATION MENU
SETTING UP MEMORIZED PRESETS
You can store up to 10 presets, numbered from "0" to "9".
When configuring each of them keep in mind that only
the presets that have a non-zero value stored will be
To set these values follow the procedure:
1. Simultaneously press the "ON" and "SELECT" buttons
until the setup menu is displayed. The "Presets" menu
is displayed on the screen.
3. Press SELECT successively until the preset you wish to
set is displayed.
5. Confirm the selection by pressing the "ON" button, the
display returns to the main menu. Pressing the "ON"
button again exits the configuration menu.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
Fig. 5
visible, so you can manage the presets needed. The preset
pr-0 is the only one that cannot be set to zero, so it will
always be visible.
2. Press and hold SELECT until the following screen is
displayed:
4. Use the quantity selection buttons (10, 1, 0.1) to set the
desired value. A long press of these buttons resets the
corresponding digit to zero. If you wish to set more
presets, repeat the process from step 3.
Fig. 6
Fig. 7
R. 03/22 896 846
EN
7
Werbung
