Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPARE PARTS
Pos. Code
Description
1
369638
Electronic module
2
369634
Oval gears kit
3
369639
Valve sealing kit
4
369228.010
Flexible 90º outlet with quarter turn opening non-drip tip
5
369232.010
Rigid outlet with quarter turn opening non-drip tip
TROUBLESHOOTING GUIDE
Problem
Screen does not turn on
Fluid not being dispensed
The gun does not supply fluid and
the AUTO mode is activated.
Accuracy error
Low flowrate
Dispensed quantity excedes
preset value
DISPOSAL INFORMATION
The symbol above means that according to local laws and regulations your product and/or its
battery must be disposed of separately from household waste. When this product reaches its end of
life, take it to a collection point designated by local authorities. The separate collection and recycling
of your product and/or its battery at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the environment.
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
5
2
4
Posible cause
Discharged batteries
Stand-by mode
Loose batteries cover
AUTO mode not activated
AUTO mode activated with trigger
pulled
Very high or low flowrates used
Very high or low (water based fluid)
fluid viscosity
Strainer damaged or dirty
Low pump pressure
Very high flowrate
1
3
Solution
Replace batteries
Press ON button
Tighten battery cover screws
Press AUTO mode
Release trigger, desactivate AUTO mode
and re-activate it making sure that the
trigger is not depressed
Calibrate
Calibrate
Replace or clean strainer
Increase pump air pressure
Adjust valve anticipation closing factor
R. 03/22 896 846
EN
13
Werbung
